Supero SUPERSERVER 8027R-7RFT+, User Manual

Page: 110 / 131

Chapter 7: BIOS
7-15
RAID Mode
The following items are displayed when RAID Mode is selected:
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are Enabled and Disabled.

PCIe/PCI/PnP Confi guration
PCI ROM Priority
Use this feature to select the Option ROM to boot the system when there are
multiple Option ROMs available in the system. The options are EFI Compatible
ROM and Legacy ROM .
PCI Latency Timer
Use this feature to set the latency Timer of each PCI device installed on a PCI
bus. Select 64 to set the PCI latency to 64 PCI clock cycles. The options are
32, 64 , 96, 128, 160, 192, 224 and 248.
Above 4G Decoding (Available if the system supports 64-bit PCI
decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above
4G Address. The options are Enabled and Disabled .
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled .
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI
Bus Signal Error Event. The options are Enabled and Disabled .
Maximum Payload
Select Auto to allow the system BIOS to automatically set the maximum payload
value for a PCI-E device to enhance system performance. The options are Auto ,
128 Bytes and 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
Maximum Read Request
Select Auto to allow the system BIOS to automatically set the maximum Read
Request size for a PCI-E device to enhance system performance. The options are
Auto , 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.