Supero SuperServer 6041G, User Manual

Page: 58 / 114

5-24
SUPERSERVER 6041G Manual
Parallel Port Connector
The parallel port is located on J16
and requires a 26-pin ribbon cable
for operation. See the table on the
left for pin definitions.
Floppy Connector
The floppy connector is located
on J15 and requires a 34-pin rib-
bon cable for operation. See the
table on the right for pin defini-
tions.
Pin Number Function
1 Strobe-
3 Data Bit 0
5 Data Bit 1
7 Data Bit 2
9 Data Bit 3
11 Data Bit 4
13 Data Bit 5
15 Data Bit 6
17 Data Bit 7
19 ACK
21 BUSY
23 PE
25 SLCT
Pin Number Function
2 Auto Feed-
4 Error-
6 Init-
8 SLCT IN-
10 G ND
12 G ND
14 G ND
16 G ND
18 G ND
20 G ND
22 G ND
24 G ND
26 NC
Parallel (Printer) Port Pin Definitio ns
(J16)
Pin Number Function
1 G ND
3 G ND
5 Key
7 G ND
9 G ND
11 G ND
13 G ND
15 G ND
17 G ND
19 G ND
21 G ND
23 G ND
25 G ND
27 G ND
29 G ND
31 G ND
33 G ND
Pin Number Function
2 FDHDIN
4 Reserved
6 FDEDIN
8 Index-
10 M otor Enable
12 D rive Select B-
14 D rive Select A-
16 M otor Enable
18 DIR-
20 STEP-
22 W rite Data-
24 W rite G ate-
26 Track 00-
28 W rite Protect-
30 Read Data-
32 Side 1 Select-
34 Diskette
Floppy Connector Pin Definitions (J15)
5-11 Parallel Port, Floppy/Hard Disk Drive and SCSI
Connections
Use the following information to connect the floppy and hard disk drive
cables.
• The floppy disk drive cable has seven twisted wires.
• A red mark on a wire typically designates the location of pin 1.
• A single floppy disk drive ribbon cable has 34 wires and two connectors to
provide for two floppy disk drives. The connector with twisted wires always
connects to drive A, and the connector that does not have twisted wires
always connects to drive B.