Supero SuperServer 6041G, User Manual

Page: 14 / 114

SUPERSERVER 6041G Manual
1-4
1-3 Mainboard Features
At the heart of the SuperServer 6041G lies the P3TDE6, a dual processor
motherboard designed to provide maximum performance in a two-way sys-
tem. Below are the main features of the P3TDE6.
Processors
The P3TDE6 supports dual Pentium III 500 - 1.26+ GHz MHz 100/133 MHz
FSB processors. Please refer to the support section of our web site for a
complete listing of supported processors (http://www.supermicro.com/
TechSupport.htm).
Memory
Your P3TDE6 has four DIMM slots that can support up to 4 GB of ECC
registered DIMM. Module sizes of 128MB, 256MB, 512MB and 1 GB may be
populatd in the slots. The P3TDE6 supports two-way interleaved memory.
Notes on Memory:
Note 1 : The memory speed must match the front side bus (FSB) speed
being used (i.e. both 133 MHz or both 100 MHz).
Note 2 : Memory Modules must be installed in pairs (first in the two slots of
Bank0 and then in both slots of Bank1, if 4 DIMMs are needed).
Onboard SCSI
Onboard SCSI is provided with an Adaptec AIC-7899 SCSI controller chip,
which supports dual channel, Ultra160 SCSI at a burst throughput rate of
160 MB/sec for each channel. The P3TDE6 provides three SCSI ports: two
68-pin LVD Ultra160 connectors (on channels A and B) and one 50-pin
Legacy SCSI connector (shared with channel B.)