Supero SuperServer 6041G, User Manual

Page: 19 / 114

Chapter 2: Server Installation
2-3
2-4 Installing the SuperServer 6041G into a Rack
This section provides information on installing the SuperServer 6041G into a
rack unit. If the 6041G has already been mounted into a rack, you can skip
ahead to Sections 2-5 and 2-6. There are a variety of rack units on the
market, which may mean the assembly procedure will differ slightly. The
following is a guideline for installing the 6041G into a rack with the rack
rails provided. You should also refer to the installation instructions that
came with the rack unit you are using.
Identifying the Sections of the Rack Rails
You should have received two rack rail assemblies with the SuperServer
6041G. Each of these assemblies consist of three sections: an inner fixed
chassis rail that secures to the 6041G (A), an outer fixed rack rail that
secures directly to the rack itself (B), and a sliding rail guide (C) between
the two, which should remain attached to the fixed rack rail. (See Figure 2-
1, which shows the chassis rail 'A' already attached to the chassis).
The first thing you must do is to remove the fixed chassis rail (A)
from each assembly. To do this, pull this inner rail out as far as possible
- you should hear a "click" sound as a locking tab emerges from inside
the rail assembly and locks the inner rail. Depress the locking tab to pull
the inner rail completely out.
Figure 2-1. Identifying the Sections of the Rack Rails
A
C
B