Supero SuperServer 6041G, User Manual

Page: 49 / 114

Chapter 5: Advanced Motherboard Setup
5-15
Reset
The Reset connection is located
on pins 3 and 4 of JF2. This con-
nector attaches to the hardware
r e s e t s w i t c h o n t h e c o m p u t e r
case. See Figure 5-2 for pin defi-
nitions. See the table on the right
for pin definitions on JF1.
Pin
Number
15
17
Definition
Reset
Ground
Reset Pin
Definitions
(JF 1)
NIC 1 LED
The LED connection for the Net-
work Interface Controller 1 is lo-
cated on pins 11 and 12 of JF2.
This header is used to display net-
work activity for LAN1. See Fig-
ure 5-2 for pin definitions. See the
table on the right for pin definitions
on JF1.
NIC LED Pin
Definitions
(JF 1)
Pin
Number
12
14
Definition
+5V
GND
Power Fail LED (PFL)
The Power Fail LED connection is
located on pins 5 and 6 of JF2.
See Figure 5-2 for pin definitions.
See the table on the right for pin
definitions on JF1.
P in
Number
8
10
Definition
+5V
PW R Fail
Po w er Fail LE D
P in Definitions
(JF1)
Overheat LED (OH)
Pins 7 and 8 on JF2 are for the
overheat LED, which provides ad-
vance warning of chassis over-
heating. See Figure 5-2 for pin
definitions. See the table on the
right for pin definitions on JF1.
Overheat LED (OH)
Pin Definitions
(JF 1)
Pin
Number
26
Definition
OH Active