Supero SuperServer 6041G, User Manual

Page: 3 / 114

Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 6041G. Installation and maintainance should be performed by expe-
rienced technicians only.
The SuperServer 6041G is a high-end dual processor 4U rackmount server
based on the SC840 4U rackmount server chassis and the Super P3TDE6, a
dual processor motherboard that supports one or two Pentium III FCPGA
processors and 4GB registered ECC DIMM memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the P3TDE6
mainboard and the SC840 chassis, which make up the SuperServer 6041G.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6041G into a rack and check out the server configuration prior to powering
up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general
overview of safety precautions that should be followed when installing and
servicing the SuperServer 6041G.
iii
Preface