Supero SUPERSERVER 6027R-72RFT+, User Manual

Page: 55 / 108

Chapter 5: Advanced Serverboard Setup
5-25
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, the yellow LED flashes to indi -
cate activity while the other LED may
be green, amber or off to indicate the
speed of the connection. See the table
on the right for the functions associ-
ated with the connection speed LED.
Onboard Power LED (LE1)
An Onboard Power LED is located at
LE1. This LED Indicator is lit when
the system is on. Be sure to unplug
the power cable before removing or
adding any components. See the table
on the right for more details.
IPMI Dedicated LAN LEDs
An additional Dedicated IPMI LAN port
is also located on the I/O backplane.
The amber LED on the right indicates
activity, while the green LED on the
left indicates the speed of the connec-
tion. See the table at right for more
information.
Link LED Activity LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED Status Definition
Link Green: Solid 100 Mbps
Activity Amber: Blinking Active
X8DT3-LN4/LN4F
X8DT3/i-F/-LN4F
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEM1 on the motherboard. When
blinking, BMC is functioning normally.
BMC Heartbeat LED
LED Definition
D1 Blinking: BMC: Normal
Onboard PWR LED Indicator
LED Color Definition
Off System Off (PWR cable
not connected)
Green System On
Green:
Flashing
Quickly
ACPI S1 State
LAN Port LEDs
(Connection Speed Indicator)
LED Color 1 Gb Ports 10 Gb Ports
Off NC or 10 Mb/s 10/100 Mb/Off
Green 100 Mb/s 10 Gb/s
Amber 1 Gb/s 1 Gb/s