Supero SUPERSERVER 6027R-72RFT+, User Manual

Page: 10 / 108

1-2
S
UPER
S
ERVER 6027R-72RFT+ User's Manual
1-2 Serverboard Features
The SuperServer 6027R-72RFT+ is built around the X9DR7-TF+, a dual processor
serverboard based on the Intel C600 chipset and designed to provide maximum
performance. Below are the main features of the X9DR7-TF+. (See Figure 1-1 for
a block diagram of the chipset).
Processors
The X9DR7-TF+ supports single or dual Intel® Xeon E5-2600 Series processors in
LGA 2011 sockets (Socket R). Please refer to the serverboard description pages on
our web site for a complete listing of supported processors (www.supermicro.com).
Memory
The X9DR7-TF+ has 24 DIMM slots that can support up to 768 GB of RDIMM, ECC
LRDIMM or ECC/non-ECC UDIMM DDR3-1600/1333/1066/800 type memory. Both
1.5V and 1.35V DIMMs are supported. Use of DDR3-1600 depends on memory
configuration. See Chapter 5 for details.
SAS
A total of eight SAS ports are provided with an onboard LSI 2208 SAS controller.
RAID 0, 1, 5, 6, 10, 50 and 60 are supported.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives.
Serial ATA
A SATA controller is also integrated into the chipset to provide two SATA 3 (6/Gbps)
and four SATA 2 (3 Gbps) ports, which are RAID 0, 1, 5 and 10 supported. The
SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The X9DR7-TF+ has two PCI-E 3.0 x16 slots and four PCI-E 3.0 x8 slots. Note that
both CPUs must be installed to enable all six PCI slots. See Chapter 5 for details.