Supero SUPERSERVER 6017R-N3RF4+, User Manual

Page: 114 / 124

7-28
S
UPER
S
ERVER 6017R-N3RF4+/6017R-N3RFT+ User's Manual
Update IPMI LAN Confi guration
This feature allows the user to decide if the BIOS should con fi gure the IPMI setting
at next system boot. The options are
No
and Yes. If the option is set to Yes, the
user is allow to con fi gure the IPMI settings at next system boot:
Confi guration Address Source
This feature allows the user to select the source of the IP address for this com-
puter. If Static is selected, you will need to know the IP address of this computer
and enter it to the system manually in the
fi eld. If DHCP is selected, the BIOS will
search for a DHCP (Dynamic Host Con fi guration Protocol) server in the network
that is attached to and request the next available IP address for this computer.
The options are
DHCP
and Static. The following items are assigned IP addresses
automatically if DHCP is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).
7-6 Boot
This submenu allows the user to con fi gure the following boot settings for the
system.
Boot Option Priorities
Boot Option #1/ Boot Option #2/ Boot Option #3, etc.
Use this feature to specify the sequence of boot device priority.