Supero SUPERSERVER 6017R-N3RF4+, User Manual

Page: 24 / 124

3-2
S
UPER
S
ERVER 6017R-N3RF4+/6017R-N3RFT+ User's Manual
HDD
Indicates IDE channel activity. On the 6017R-N3RF4+/6017R-N3RFT+ this light
indicates HDD and/or DVD-ROM drive activity when
fl ashing.
2
1
3-3 Control Panel LEDs
The control panel located on the front of the SC819TQ chassis has fi ve LEDs. These
LEDs provide you with critical information related to different parts of the system.
This section explains what each LED indicates when illuminated and any corrective
action you may need to take.
Information LED
This LED will be solid blue when the UID function has been activated. When this
LED
fl ashes red, it indicates a fan failure. When red continuously it indicates an
overheat condition, which may be caused by cables obstructing the air fl ow in the
system or the ambient room temperature being too warm. Check the routing of
the cables and make sure all fans are present and operating normally. You should
also check to make sure that the chassis covers are installed. Finally, verify that
the heatsinks are installed properly (see Chapter 5). This LED will remain
fl ashing
or on as long as the indicated condition exists.
NIC2
Indicates network activity on LAN2 when fl ashing .
NIC1
Indicates network activity on LAN1 when fl ashing.