Supero SUPERSERVER 6017R-N3RF4+, User Manual

Page: 11 / 124

1-3
Chapter 1: Introduction
1-3 Server Chassis Features
The 6017R-N3RF4+/6017R-N3RFT+ is built upon the SC819TQ-R700WB chassis.
Details on the chassis and on servicing procedures can be found in Chapter 6.The
following is a general outline of the main features of the chassis.
System Power
The SC819TQ-R700WB features a redundant 700W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
Hard Drives
The SC819TQ-R700WB chassis was designed to support four hot-swap SAS or
SATA hard drives.
PCI Expansion Slots
Two riser cards are included. The RSC-R1UW-2E16-O-P supports one standard
size PCI-E 3.0 x16 card and one standard size PCI-E 3.0 x8 card. The RSC-R1UW-
E8R-O-P supports one low-pro
fi le PCI-E 3.0 x8 add-on card. See our web site for
details (http://www.supermicro.com/products/nfo/UIO.cfm) and section 5-6 of this
manual for details.
Front Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), overheat/fan/power failure
and system information. A main power button and a UID button is also included.
Cooling System
The SC819TQ-R700WB has an innovative cooling design that features six sets of
4-cm counter-rotating fans located in the middle section of the chassis. Fan speed
may be determined by IPMI. The power supply module also includes a cooling fan.