Supero SUPERSERVER 5017P-TF, User Manual

Page: 85 / 95

7-26
S
UPER
S
ERVER 5017P-TLN4F/TF User's Manual
Log EFI Status Codes
This option enables or disables the logging of Extensible Firmware Interface
(EFI) status codes. The options are Disabled, and
Enabled .

BMC Network Configuration
Set this feature to configure the IPMI LAN adapter with a network address.
Update IPMI LAN Configuration
This feature allows the user to decide if the BIOS should configure the IPMI setting
at next system boot. The options are No and Yes. If the option is set to Yes, the
user is allowed to configure the IPMI settings at next system boot.
Configuration Source
This feature selects whether the IP address, Subnet Mask and Gateway Address
are automatically assigned by the network's DHCP (Dynamic Host and Configuration
Protocol) server or manually entered by the user (Static). When DHCP is selected,
all the options below are automatically assigned to the system by itself or by an
external DHCP server. If Static is selected, the IP Address, Subnet Mask and Gate-
way Address must be manually entered below. The options are Static and
DHCP .
Station IP Address - Enter the IP address for this machine. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253). The value of each three-
digit number separated by dots should not exceed 255.
Subnet Mask - Subnet masks tell the network which subnet this machine be-
longs to. The value of each three-digit number separated by dots should not
exceed 255.
Station MAC Address - MAC addresses are 6 two-digit hexadecimal numbers
(Base 16, 0 ~ 9, A, B, C, D, E, F) separated by dots (i.e., 00.30.48.D0.D4.60).
Gateway IP Address - Enter the Gateway or Router address (i.e., 192.168.10.1).