Supero SUPERSERVER 5017P-TF, User Manual

Page: 38 / 95

5-10
S
UPER
S
ERVER 5017P-TLN4F/TF User's Manual
Fan Headers
There are three fan headers on the
motherboard, all of which are 4-pin
fans (Fan 1-Fan 8). Pins 1-3 of the
fan headers are backward compatible
with the traditional 3-pin fans. (Fan
speed control is supported with 4-pin
fans only.) See the table on the right
for pin definitions. The onboard fan
speeds are controlled by IPMI.
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWR Modulation
Serial Port Pin Definitions
(COM1/COM2)
Pin # Definition Pin # Definition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach a chassis intrusion
cable from the chassis to inform you of
a chassis intrusion when the chassis
is opened
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
Serial Ports
Two serial ports are included on the
motherboard. COM1 is a backpanel
port and COM2 is a header located
just behind COM1 to provide front
access support. See the table on the
right for pin definitions.
Ethernet Ports
Four Ethernet ports are located on the
I/O backplane. A dedicated IPMI LAN
port is also included to provide KVM
support for IPMI 2.0. These ports ac-
cept RJ45 type cables.
LAN Ports
Pin Definition
Pin# Definition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED (Yel-
low, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground