Supero SuperServer 5013C-i, User Manual

Page: 15 / 118

Chapter 1: Introduction
1-5
1-3 Server Chassis Features
The SuperServer 5013C-T/5013C-i is a 1U rackmount server platform designed
with some of today's most state-of-the-art features. The following is a general
outline of the main features of the SC811 chassis. (The 5013C-T uses the
SC811T-250 modification and the 5013C-i uses the SC811i-250 modification of
the same SC811 chassis.)
System Power
When configured as a SuperServer 5013C-T/5013C-i, the SC811 chassis in-
cludes a single 250W power supply.
Serial ATA Subsystem (5013C-T)
For the 5013C-T, the SC811T chassis was designed to support two Serial ATA
hard drives. The Serial ATA drives are hot-swappable units. ATA/100 IDE drives
are also supported.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Control Panel
The SC811's control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive activity
and system overheat conditions. The control panel also includes a main power
button and a system reset button.