Supero SuperServer 5013C-i, User Manual

Page: 3 / 118

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 5013C-T/
5013C-i. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 5013C-T/5013C-i is a high-end single processor 1U rackmount
server based on the SC811T-250/SC811i-250 1U rackmount server chassis and
the Super P4SCE motherboard. The P4SCE supports single Intel
®
Pentium
®
4
processors of up to 3.40 GHz with a 2 MB integrated Advanced Transfer Cache
and hyper-threading technology and single Intel
®
Celeron
®
processors of up to
2.40 GHz with a 128KB integrated Advanced Transfer Cache in 478-pin microPGA
sockets.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the Super P4SCE motherboard
and the SC811 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
5013C-T/5013C-i into a rack and check out the server configuration prior to
powering up the system. If your server was ordered without the proces-
sor and memory components, this chapter will refer you to the appropriate
sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the
functions and information provided by the control panel on the chassis as
well as other LEDs located throughout the system.
iii
Preface