Supero SuperServer 5013C-i, User Manual

Page: 95 / 118

Appendix C: Software Installation
C-5
Primary Master(=PM) Yes Yes No No No No
Primary Slave(=PS) Yes No Yes No No No
Secondary Master(=SM) Yes No No Yes No No
Secondary Slave(=SS) Yes No No No Yes No
SATA Port0 No SM SM PM PM PM
SATA Port1 No SS SS PS PS PS
*Note: (No=Not Present, Yes=Present) Also, if Logical Primary is
selected, the IDE channels are no longer available.
Native Mode:
In this mode, system BIOS will automatically search all available IRQs for HDD use.
For newer operating systems that support switching to Native Mode such as Win-
dows XP and Windows 2003, you can set SATA and PATA to Native Mode. These
newer operating systems can accommodate both Legacy and Native modes and
support up to six ATA devices. (To select Legacy or Native Mode, please go to the
"BIOS Setup" section in System BIOS.)
Configuring BIOS settings for SATA RAID (Native Mode)
1.Press the <Del> key during system bootup to enter the BIOS Setup Utility.
Note: If it is the first time powering on the system, we recommend you load the
Optimized Default Settings. If you have already done so, please skip to Step 3.
2. Use the arrow keys to select the "Exit" Settings. Once in the "Exit" settings,
scroll down to select the item "Load Optimized Default Settings" and press the
<Enter> key. Type "Y" for "Yes" to confirm the selection, then press the <Enter>
key to load the default settings for the BIOS.
3. Use the arrow keys to select the "Advanced" settings in the BIOS.
4. Scroll down to "Advanced Chipset Control" and press the <Enter> key to
select this option.
5. Select "Manual" for the item "On Chip Serial ATA" and press the <Enter> key
to select this option.
6. Select "Tertiary Master" for the item "Serial ATA Port0" and press the <Enter>
key to select this option.
7. Select "Quaternary Master" for the item "Serial ATA Port1" and press the
<Enter> key to select this option.
8. Select "Enabled" for the item "RAID Function" and press the <Enter> key to
select this option.