Supero SuperServer 5013C-i, User Manual

Page: 58 / 118

6-2
S
UPER
S
ERVER 5013C-T/5013C-i User's Manual
Figure 6-2. Chassis Rear View
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected
to the JF1 connector on the motherboard to provide you with system control
buttons and status indicators. These wires have been bundled together in
a ribbon cable to simplify the connection. Connect the cable from JF1 on
the motherboard to JP4 on the Control Panel PCB (printed circuit board).
Make sure the red wire plugs into pin 1 on both JF1 and JP4. Pull all excess
Figure 6-1. Chassis Front View (5013C-i shown)