Supero SUPERSERVER 1026TT-IBQF, User Manual

Page: 20 / 102

2-4
S
UPER
S
ERVER 1026TT-TF/1026TT-IBXF/1026TT-IBQF User's Manual
2-4 Installing the Server into a Rack
This section provides information on installing the server into a rack unit with the
rack rails provided. If the system has already been mounted into a rack, you can
skip ahead to Sections 2-5 and 2-6.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. You should also refer to the installation instructions that
came with the rack unit you are using.
Note: This rail will fi t a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
You should have received two rack rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fi xed chassis rail that secures directly
to the server chassis and an outer fi xed rack rail that secures directly to the rack
itself (see Figure 2-1).
Figure 2-1. Identifying the Sections of the Rack Rails
(right side rail shown)
Inner Rail Extension -
Attach to the Chassis
Outer Rack Rails -
Attach to the Rack
Inner Rail -
Preattached to the Chassis