Supero SUPERSERVER 1026TT-IBQF, User Manual

Page: 10 / 102

1-2
S
UPER
S
ERVER 1026TT-TF/1026TT-IBXF/1026TT-IBQF User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 1026TT-TF/1026TT-IBXF/1026TT-IBQF lies two
X8DTT-F/X8DTT-IBXF/X8DTT-IBQF dual processor serverboards, which are based
on Intel's 5520 + ICH10R chipset. Below are the main features of the serverboards.
Note that the features on each board are doubled for the server, which includes
two nodes.
Processors
Each X8DTT-F/X8DTT-IBXF/X8DTT-IBQF supports two Intel® 5500 Series proces-
sors in LGA1366 sockets. Please refer to our web site for a complete listing of
supported processors (www.supermicro.com).
Memory
Each X8DTT-F/X8DTT-IBXF/X8DTT-IBQF has twelve DIMM sockets that can sup-
port up to 192 GB of registered ECC (or 48 GB of unbuffered) DDR3-1333/1066/800
SDRAM. See Chapter 5 Section 6 for more details on installing memory into the
system and refer to our web site for updates to supported memory.
Serial ATA
The South Bridge (ICH10R) of the chipset includes a Serial ATA controller for six
Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane
that provides power, bus termination and confi guration settings. RAID 0, 1, 10 and
5 are supported. Refer to the support area of our web site for procedures on set-
ting up RAID on your system.
PCI Expansion Slots
Each X8DTT-F/X8DTT-IBXF/X8DTT-IBQF board has one PCI Express 2.0 x16
slot, so two PCI Express 2.0 x16 slots are provided in the server. In the 1026TT-
TF/1026TT-IBXF/1026TT-IBQF server confi guration, riser cards have been pre-
installed to support two low-profi le add-on cards.
Ethernet Ports
An Intel® network controller is integrated into each of the serverboards to support
two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).