Supero SuperServer 1025C-M3, User Manual

Page: 50 / 110

5-14
S
UPER
S
ERVER 1025C-M3 User's Manual
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. See the board layout for
the location of JL1 and the table on
the right for pin defi nitions.
Fan Headers
There are six fan headers on the
X7DCL-3. All are 4-pin fans but are
backward compatible with traditional
3-pin fans. FAN1 is for the CPU1
heatsink and FAN2 is for the CPU2
heatsink. See the table on the right
for pin defi nitions.
ATX PS/2 Keyboard and PS/2
Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse are located on the rear IO
panel. The mouse port is above the
keyboard port. See the table on the
right for pin defi nitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
NMI Button
Pin Defi nitions (JF1)
Pin# Defi nition
19 Control
20 Ground
Fan Header
Pin Defi nitions
(FAN1-6)
Pin# Defi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM Control
PS/2 Keyboard and
Mouse Port Pin
Defi nitions (J14)
Pin# Defi nition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# Defi nition
1 Intrusion Input
2 Ground
LAN1/2 (Ethernet Ports)
Two gigabit Ethernet ports (desig-
nated LAN1 and LAN2) are located
beside the VGA port on the I/O back-
plane. These ports accept RJ45 type
cables.