Supero SUPERSERVER 1018GR-T, User Manual

Page: 72 / 140

5-24
SUPERSERVER 1018GR-T User's Manual
5-10 Onboard Indicators
LAN1/2 Port LEDs
The Ethernet ports have two LEDs. On
each port, the yellow LED indicates
activity, while the Link LED may be green,
amber or off to indicate the speed of the
connection. See the table on the right
for the functions associated with the
connection speed LED.
LAN
Link LEDs
LED Color Definition
Off No Connection or 10 Mbps
Green 100 Mbps
Amber 1 Gbps
Manufacturer Mode Select
(JPME2)
Close this jumper to bypass SPI flash
security and force the system to use
the Manufacturer Mode, which will
allow the user to flash the system
firmware from a host server to modify
system settings. See the table on the
right for jumper settings.
Manufacturer Mode (JPME2)
Jumper Settings
Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode
I
2
C Bus for VRM
Jumpers JVRM1 and JVRM2 allow the
BMC or the PCH to access CPU and
memory VRM controllers. See the table
on the right for jumper settings.
VRM
Pin Defintions
Pin # Definition
1-2 BMC (Default)
2-3 PCH
Activity LED
Link LED
LAN
IPMI Heartbeat LED (LEDM1)
The IPMI Heartbeat LED is located at
LEDM1. When LEDM1 blinks, the IPMI
feature is functioning properly. Refer to the
table on the right for details. Also see the
layout below for the LED location.
IPMI Heartbeat LED Indicator
LED Settings
Color/State Definition
Green: Blinking IPMI is ready for use
Off IPMI Off