Supero Supero SUPERSERVER 6016T-T, User Manual

Page: 76 / 102

7-8
SUPERSERVER 6016T-T User's Manual
DCA Technology
This feature accelerates the performance of TOE devices. Note : A TOE device is
a specialized, dedicated processor that is installed on an add-on card or a network
card to handle some or all packet processing of this add-on card. For this moth-
erboard, the TOE device is built inside the ESB 2 South Bridge chip. This feature
is supported only by some types of processors (i.e., Intel Nehalem-WS 1S). The
options are Enabled and Disabled.
DCA Prefetch Delay
A DCA Prefetch is used with TOE components to prefetch data in order to shorten
execution cycles and maximize data processing effi ciency. Prefetching too fre-
quently can saturate the cache directory and delay necessary cache accesses. This
feature reduces or increases the frequency the system prefetches data. The options
are [8], [16], [32] , [40], [48], [56], [64], [72], [80], [88], [96], [104], [112], [120]
X
Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:
X
QPI & IMC Confi guration
QPI Links Speed
This feature selects QPI's data transfer speed. The options are Slow-mode, and
Full Speed .
QPI Frequency
This selects the desired QPI frequency. The options are Auto , 4.800 GT,
5.866GT, 6.400 GT.
QPI L0s and L1
This enables the QPI power state to low power. L0s and L1 are automatically
selected by the motherboard. The options are Disabled and Enabled.
Memory Frequency
This feature forces a DDR3 frequency slower than what the system has detected.
The available options are Auto , Force DDR-800, Force DDR-1066, and Force
DDR-1333.
Memory Mode
The options are Independent , Channel Mirror, Lockstep and Sparing.
Independent - All DIMMs are available to the operating system.