Supero SUPER P4SBE, User Manual

Page: 50 / 90

3-4
S
UPER P4SBR/P4SBE User's Manual
a bootable floppy and reboot your system. It is not necessary to set BIOS
boot block protection jumpers on the motherboard. At the DOS prompt,
enter the command "fwhflash." This will start the flash utility and give you
an opportunity to save your current BIOS image. Flash the boot block and
enter the name of the update BIOS image file.
N o t e : I t i s i m p o r t a n t t o s a v e y o u r c u r r e n t B I O S a n d r e n a m e i t
"super.rom" in case you need to recover from a failed BIOS update.
Select flash boot block, then enter the update BIOS image. Select "Y" to
start the BIOS flash procedure and do not disturb your system until the
flash utility displays that the procedure is complete. After updating your
BIOS, please clear the CMOS then load Optimal Values in the BIOS.
Question: After flashing the BIOS my system does not have video.
How can I correct this?
Answer: If the system does not have video after flashing your new BIOS,
it indicates that the flashing procedure failed. To remedy this, first clear
CMOS per the instructions in this manual and retry the BIOS flashing proce-
dure. If you still do not have video, please use the following BIOS Recov-
ery Procedure . First, make sure the JPWAKE jumper is set to "disabled."
Then, turn your system off and place the floppy disk with the saved BIOS
image file (see above FAQ) in drive A. Press and hold <CTRL> and <Home>
at the same time, then turn on the power with these keys pressed until your
floppy drive starts reading. Your screen will remain blank until the BIOS
program is done. If the system reboots correctly, then the recovery was
successful. The BIOS Recovery Procedure will not update the boot block
in your BIOS.
Question: What's in the CD that came with my motherboard?
Answer: The supplied compact disc has quite a few drivers and programs
that will greatly enhance your system. We recommend that you review the
CD and install the applications you need. Applications on the CD include
850 chipset drivers for Windows and security and audio drivers.
Question: Why can't I turn off the power using the momentary
power on/off switch?
Answer: The instant power off function is controlled in BIOS by the Power
Button Mode setting. When the On/Off feature is enabled, the motherboard
will have instant off capabilities as long as the BIOS has control of the
system. When the Standby or Suspend feature is enabled or when the
BIOS is not in control such as during memory count (the first screen that