Supero SUPER P4SBE, User Manual

Page: 41 / 90

Chapter 2: Installation
2-15
Watchdog Enable/Disable
Jumper JP39 allows you to enable
or disable the Watchdog feature.
The normal (default) position is
closed to disable the watchdog
timer and enable the speaker. See
the table on the right for jumper
settings.
Jumper
Position
O pen
Closed
Definition
Disabled
Enabled
W atchdog
Enable/Disable Jum per
Settings (JP39)
Keyboard Wake-Up
The JPWAKE jumper is used to-
gether with the Keyboard Wake-
Up function in BIOS. Enable both
the jumper and the BIOS setting to
allow the system to be woken up
by depressing a key on the key-
board. See the table on the right
for jumper settings.
Note: Your power supply must
meet ATX specification 2.01 or
h i g h e r a n d s u p p l y 7 2 0 m A o f
standby power to use this fea-
ture.
Jumper
Position
1-2
2-3
Definition
Disabled
Enabled
Keyboard W ake-Up
Jum per Settings
(JPW AKE)
Overheat Fan Enable/Disable
JP38 allows you to enable or disable
the overheat (thermal) fan. When
enabled, the fan will operate con-
tinuously. When disabled, it will op-
erate only when a predefined tem-
perature threshold has been ex-
ceeded. See the table on the right
for jumper settings.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
T hermal Fan
Enable/Disable
Jumper Settings (JP38)