Supero SUPER P4DME-M User Manual Download Page 7

Page: 7 / 86

Chapter 1: Introduction

1-1

Introduction

Chapter 1

Introduction

1-1

Overview

Checklist

Congratulations on purchasing your computer motherboard from an ac-

knowledged leader in the industry. Supermicro boards are designed with

the utmost attention to detail to provide you with the highest standards in

quality and performance.

Please check that the following items have all been included with your

motherboard. If anything listed here is damaged or missing, contact your

retailer.

One (1) Supermicro Mainboard

One (1) ribbon cable for IDE devices

One (1) floppy ribbon cable

One (1) I/O backpanel shield

One (1) Supermicro CD or diskettes containing drivers and utilities

One (1) User's/BIOS Manual

Two (2) Pentium 4 Xeon active heatsinks (FAN-042, retail only)

Two (2) heatsink retention clips (SKT-095)

SCSI Accessories (P4DMS-6GM only)

One (1) 68-pin LVD SCSI cable

One (1) set of SCSI driver diskettes

One (1) SCSI manual

Summary of Contents for SUPER P4DME-M























































































Search results

Summary of Contents for SUPER P4DME-M

Reviews:

Related manuals for SUPER P4DME-M

Brands by name

Popular brands

Supero SUPER P4DME-M, User Manual

Search results

Summary of Contents for SUPER P4DME-M

Reviews:

Related manuals for SUPER P4DME-M

Brands by name

Popular brands