Supero SUPER P4DME-M, User Manual

Page: 16 / 86

S
UPER P4DMS-6GM/P4DME-M User’s Manual
1-10
Introduction
Motherboard Features
CPU
• Single or dual Intel
®
603-pin Xeon
TM
512K L2 cache processors at up
to 2.8 GHz at a 400 MHz front side (system) bus speed.
Note: Please refer to the support section of our web site for a complete listing of supported
processors (http://www.supermicro.com/TechSupport.htm).
M e m o r y
• Six 184-pin DDR DIMM sockets supporting up to 12 GB of registered
ECC DDR-200 (PC1600) DDR SDRAM
Note: Interleaved memory; requires memory modules to be installed in pairs. DDR-266
(PC2100) memory is supported but only at 200 MHz. Do not mix memory sizes and speeds. See
Section 2-3 for details.
Chipset
• Intel E7500 (Plumas) chipset
Expansion Slots
P4DMS-6GM P4DME-M
• One 64-bit, 133 MHz PCI-X • One 64-bit, 133 MHz PCI-X
• Two 64-bit, 66 MHz PCI-X • Two 64-bit, 100 MHz PCI-X
• Three 32-bit, 33 MHz PCI • Three 32-bit, 33 MHz PCI
BIOS
• 4 Mb Phoenix
®
Flash ROM
• APM 1.2, DMI 2.1, PCI 2.2, ACPI 1.0, Plug and Play (PnP), SMBIOS 2.3
PC Health Monitoring
• Onboard voltage monitors for CPU cores, chipset voltage, 3.3V, +5V,
+
12V and 3.3V standby
• Fan status monitor with firmware/software on/off control
• CPU/chassis temperature monitors
• Environmental temperature monitor and control
• CPU fan auto-off in sleep mode
• CPU slow-down on temperature overheat
• CPU overheat LED header
• Power-up mode control for recovery from AC power loss
• Auto-switching voltage regulator for CPU core
• Chassis intrusion detection