Supero SUPER P4DME-M, User Manual

Page: 40 / 86

2-16
S
UPER P4DMS-6GM/P4DME-M User’s Manual
SCSI Enable/Disable
(P4DMS-6GM only)
The SCSI Termination jumper at
JP22 allows you to enable or dis-
able the onboard SCSI controller.
The normal (default) position is on
pins 1-2 to enable SCSI termina-
tion. See the table on the right for
jumper settings.
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
S C S I E n a b le /D is a b le
J u m p e r S e tting s
(J P 2 2 )
SCSI Termination Enable/
Disable (P4DMS-6GM only)
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
t h e i n d i v i d u a l S C S I c h a n n e l s .
Jumper JPA1 controls SCSI channel
A and JPA2 controls SCSI channel
B. The normal (default) setting is
open to enable (teminate) both SCSI
channels. If you wish to connect
external SCSI devices, you should
d i s a b l e t e r m i n a t i o n f o r t h e
channnel(s) you will be connecting
them to. See the table on the right
for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
E n a b le d
D isa b le d
S C S I C h a n n e l T e rm in a tio n
E n a b le /D is a b le
J u m p e r S e tting s
(J P A 1 , J P A 2 )
Watch Dog Enable/Disable
Use JP37 to enable or disable the
Watch Dog feature. The default po-
sition is open to disable the Watch
Dog timer. The jumper must be used
in conjunction with the Watch Dog
enabled setting in BIOS (Advanced
Setup > I/O Device Configuration).
W h e n e n a b l e d , W a t c h D o g c a n
reboot your PC if an application is
" h u n g u p " o r t h e s y s t e m g o e s
down. See the table on the right
for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
W a tc h D o g T im e r E n a b le /
D is a b le J u m p e r S e ttin g s
(J P 3 7 )