Supero SUPER P4DME-M User Manual Download Page 63

Page: 63 / 86

Chapter 4: PhoenixBIOS

4-13

Fast String Operations

This setting allows you to Enable or Disable fast string operations.

Compatible FPU Code

This setting allows you to Enable or Disable the compatible FPU code.

Split Lock Operations

This setting allows you to Enable or Disable split lock operations.

Hyper-Threading

This setting allows you to Enable or Disable hyper-threading. Enabling

hyper-threading results in increased CPU performance.

L3 Cache

This setting allows you to Enable or Disable the L3 cache.

DMI Event Logging

Access the submenu to make changes to the following settings.

Event Log Validity

This is a display, not a setting, informing you of the event log validity.

Event Log Capacity

This is a display, not a setting, informing you of the event log capacity.

View DMI Event Log

Highlight this item and press <Enter> to view the contents of the event

log.

Summary of Contents for SUPER P4DME-M























































































Search results

Summary of Contents for SUPER P4DME-M

Reviews:

Related manuals for SUPER P4DME-M

Brands by name

Popular brands

Supero SUPER P4DME-M, User Manual

Search results

Summary of Contents for SUPER P4DME-M

Reviews:

Related manuals for SUPER P4DME-M

Brands by name

Popular brands