Supero SC847 Series, User Manual

Page: 49 / 188

5-11
Chapter 5: Chassis Setup and Maintenance
Expansion Slot Setup in U (Universal Output) Chassis
SC847 U model chassis accepts a slightly smaller "L" shaped motherboard to allow
for a universal expansion card. This universal output card allows the systems to
accept SAS, SCSI, IB, Ethernet, and other types of connections.
SC847 U chassis accepts three full-length, full-height add-on cards and the fourth
slot is used for the UI/O card. It includes a bracket that extends from the fan row to
the back of the chassis. This bracket provides support for the riser card.
Installing a Universal Input/Output Card in the SC847 U Model Chassis
1. Power down the system as described in Section 5-2, lay the chassis on a flat
surface, and open the chassis cover.
2. Connect the universal input/output to the motherboard using the slots pro-
vided on the motherboard and the back panel.
3. Secure the card to the chassis using the four screws provided in the chassis
packaging.
Installing Expansion Cards in the SC847 U Chassis
1. Power down the system as described in Section 5-2, lay the chassis on a flat
surface, and open the chassis cover.
2. If you are using a universal input/output card, make sure it is installed before
continuing.
3. If you installing low profile expansion cards, remove the chassis air shroud.
4. Secure the card to the chassis using the four screws provided with the chas-
sis packaging.