Supero SC847 Series, User Manual

Page: 45 / 188

5-7
Chapter 5: Chassis Setup and Maintenance
Installing a 3.5" Single Hard Drive into the Bracket
1. Align the four round washers and four screws with the holes in the hard drive
and the holes in the bracket.
2. Secure the hard drive to the bracket using the screws and washers provided.
3. See the instructions below for installing the bracket onto the chassis.
Installing Dual 2.5" Hard Drives into the Bracket
1. Align the eight external tooth washers and eight screws with the holes in the
hard drives and the holes in the bracket.
2. Secure the hard drives to the bracket using the screws and washers provided.
3. See the instructions below for installing the bracket onto the chassis.
Installing the Bracket and Hard Drives into the Chassis
1. Align the holes in the bracket with the chassis standoffs.
2. Secure the bracket using the screws provided as shown in Figure 5-8.
Figure 5-8. Installing Single and Dual Hard Drives and the Bracket