SC743 Chassis Manual
D-16
Install a new drive into the carrier with the printed circuit board side facing
3.
downward so that the mounting holes in the drive align with those in the car-
rier.
Secure the hard drive to the carrier with the six screws provided.
4.
Return the drive carrier to the mobile rack. Make sure that the drive carrier
5.
handle is returned to the closed and locked position. Repeat these steps for
each hard drive you want to install.
Drive Tray
SAS/SATA or SCSI
Hard Drive
Figure D-10: Installing a Hard Drive
1
4
1
4
Warning! Enterprise level hard disk drives are recommended
for use in Supermicro chassis and servers. For information on
recommended HDDs, visit the Supermicro Web site at http://
www.supermicro.com/products/nfo/storage.cfm
!
