4-13
Chapter 4: Chassis Setup and Maintenance
Secure the heatsink to the motherboard as directed by the motherboard
6.
documentation.
Secure the motherboard to the chassis using Type A screws, which are in-
7.
cluded in the chassis accessory kit. Do not exceed eight pounds of torque per
square inch when tightening down the motherboard.
Replace the middle and rear system fans as directed in section 4-6.
8.
Replace the air shroud as directed in section 4-7.
9.
Warning:
The system fans, air shroud and chas-
sis cover must be installed prior to operating the
system. Out-of-warranty damage may result if the
system is operated without proper cooling protec-
tion in place.
!
!
Figure 4-12: Installing the Motherboard
