4-7
Chapter 4: Chassis Setup and Maintenance
4-6 Configuring the Storage Module
Storage Module Options
The storage module can be configured to accommodate a variety of data storage
devices such as CD, IDE, DVD and floppy drives. The chassis may be rotated from a
vertical tower position, to a horizontal rack mounting position to accommodate use of
these devices. The following configurations may be used in the SC743 chassis:
5.25" Drives: Install any combination of three 5.25" devices.
•
3.5" Drives: Install three 3.5" fixed hard drives in a 5.25" peripheral drive bay,
•
or install five hot-swappable hard drives by using an M35 mobile rack inside
the storage module.
Tower Configuration: Rotate the chassis into an upright tower position. Remove
•
the storage module, rotate it 90 degrees and reinstall it back into the chassis.
Mobile Rack: Remove the storage module and replace it with either the CSE-
•
M35TQ or CSSE-M35S mobile rack.
Removing the Storage Module
Locate the release tab on top of the storage module as shown below. Press
1.
the release tab to unlock the storage module.
Once unlocked, push the module forward and out of the chassis.
2.
1
2
Figure 4-6: Removing the Storage Module
