Supero PDSLA User Manual Download Page 70

Page: 70 / 80

PDSLA/PDSLE

User's Manual

4-14

Award BIOS attempts to load the operating system from devices speciﬁ ed by the
users in a user-speciﬁ ed sequence.

Hard Disk Boot Priority

This item allows the user to select the Boot Priority of Hard Disk

Devices.

First Boot Device

This item allows the user to set the ﬁ rst boot-up device. The options are

Floppy

LS120, HDD, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD,

LAN and Disabled.

Second Boot Device

This item allows the user to set the second boot-up device. The options are Floppy,

LS120, HDD,

CDROM

, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD,

LAN and Disabled.

Third Boot Device

This item allows the user to set the third boot-up device. The options are Floppy,

LS120,

HDD

, SCSI, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-

HDD, LAN and Disabled.

Boot Other DeviceDevice

If enabled, this option enables the BIOS to load the OS from another device rather

than the ones that have been speciﬁ ed as the ﬁ rst, second and third boot up devices.

The settings are

Enabled

and Disabled.

Summary of Contents for PDSLA

















































































Search results

Summary of Contents for PDSLA

Reviews:

Related manuals for PDSLA

Brands by name

Popular brands

Supero PDSLA, User Manual

Search results

Summary of Contents for PDSLA

Reviews:

Related manuals for PDSLA

Brands by name

Popular brands