Supero PDSLA, User Manual

Page: 26 / 80

2-6
PDSLA/PDSLE User's Manual
To Install:
Insert module
vertically and
press down
until it snaps
into place.
Pay attention
to the notch.
Figure 2-2. Side and Top Views of DDR2 Module Installation into Slot
To Remove:
Use your thumbs
gently to push
each release tab
outward to release
the DIMM from
the slot.
2-4 Installing DDR2 Memory
CAUTION
Exercise extreme care when installing or removing memory modules
to prevent any possible damage.
Memory Module Installation (See Figure 2-2)
1. Insert each DDR2 memory module vertically into its slot. Pay attention to the
notch along the bottom of the module to prevent inserting the module incor-
rectly. (See support information below.)
2. Gently press down on the memory module until it snaps into place.
Support
The PDSLA/PDSLE supports Single/Dual channel, unbuffered, non-ECC,
DDR2 667/533/400 SDRAM. (Populate DIMM#1A,DIMM#1B, and/or
DIMM#2A, DIMM#2B with memory modules of the same size/same type will
result in the dual channel, two-way interleaved memory which is faster than
the single channel, non-interleaved memory.)
II