5-16
S
UPER
S
ERVER 5038ML-H8TRF User's Manual
VGA Enable (JPG1)
JPG1 allows the user to enable the on-
board VGA connector (through the KVM).
Close pins 1~2 to enable the VGA. The
default setting is Enabled.
Watch Dog RST/NMI Selection
(JWD1)
Watch Dog (JWD1) is a system moni-
tor that can reboot the system when a
software application hangs. Close pins
2~3 to reset the system if an applica-
tion hangs. Close pins 1~2 to generate
a non-maskable interrupt signal for the
application that hangs. See the table on
the right for jumper settings. Watch Dog
must also be enabled in the BIOS.
VGA Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
Enabled
Pins 2-3
Disabled
Watch Dog
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
NMI
Pins 2-3
Reset
Open
Disabled
Manufacturer Mode Select
Close this jumper (JPME2) to bypass
SPI fl ash security and force the system
to use the Manufacturer mode, which
allows the user to flash the system
fi rmware from a host server to modify
system settings.
ME Mode Select
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
Normal (Default)
Pins 2-3
Manufacture Mode
ME Recovery
Jumper Settings
Jumper Setting Defi nition
Pins 1-2
Normal (Default)
Pins 2-3
ME Recovery
ME Recovery
Use jumper JPME1 to select ME Firm-
ware Recovery mode, which will limit
system resources for essential functions
only without putting restrictions on power
use. In single operation mode, online
upgrade will be available via Recovery
mode.
Summary of Contents for MicroCloud 5038ML-H8TRF
