Supero MicroCloud 5038ML-H8TRF, User Manual

Page: 10 / 122

1-2
S
UPER
S
ERVER 5038ML-H8TRF User's Manual
1-2 Motherboard Features
The 5038ML-H8TRF includes a total of eight X10SLD-F single processor mother-
boards, which are based on the Intel C224 PCH chipset. Below are the main features
of the X10SLD-F. (See Figure 1-1 for a block diagram of the chipset).
Processors
Each X10SLD-F supports a single Intel® Xeon® E3-1200 v3 family or Intel 4th
Gen Core™ i3, Pentium or Celeron processor in an LGA 1150 socket (Socket H3).
Please refer to the motherboard description pages on our web site for a complete
listing of supported processors (www.supermicro.com).
Memory
The X10SLD-F has four DIMM slots that can support up to 32 GB of ECC UDIMM
DDR3-1600/1333/1066 memory. This equates to a maximum of 256 GB for the
system. Memory modules of the same size and speed should be used. See Chapter
5 for details.
SATA
Each X10SLD-F has a SATA controller integrated into the chipset to provide four on-
board SATA 3.0 ports. Two of these can be connected to the system's hot-swappable
SATA drives (two from each node for 16 total in the system).
Rear I/O Ports
The rear I/O panel includes one KVM connector, an IPMI port, a power LED and
buttons for UID (Unit Identifi cation) and power.
IPMI
IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-
fi cation that provides remote access, monitoring and administration for Supermicro
server platforms. IPMI allows server administrators to view a server’s hardware
status remotely, receive an alarm automatically if a failure occurs, and power cycle
a system that is non-responsive.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.