Supero C7B75, User Manual

Page: 82 / 97

4-18
C7B75 User’s Manual

PCH-FW Configuration
This feature displays ME configuration settings.
Me Firmware Re-Flash
Use this feature to enable re-flashing of the ME firmware. The options are Disabled
and Enabled.

Intel® Ethernet Controller 10 Gigabit
This item displays the following information on the Intel 82579V Gigabit Network
Connection.

NIC Configuration
Link Speed
Use this feature to change the link speed and duplex for the current port. The
options are
AutoNeg , 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100
Mbps Full.
Wake on LAN
Select Enabled to wake the system with a magic packet. The options are Dis-
abled and
Enabled .
Blink LEDs (range 1-15 seconds)
This feature allows the user to specify the duration for LEDs to blink. The range is
from 0 ~ 15 seconds. The default setting is
0 .
PORT CONFIGURATION INFORMATION
This section displays the following port information:
•
UEFI Driver
•
Adapter PBA
•
Chip Type
•
PCI Device ID
•
PCI Bus:Device:Function
•
Link Status
•
Factory MAC Address