Supero C7B75, User Manual

Page: 72 / 97

4-8
C7B75 User’s Manual

Chipset Configuration
WARNING : Setting the wrong values in the following sections may cause the system
to malfunction.

System Agent (SA) Configuration
Use this section to modify System Agent (SA) parameters.

Graphics Configuration
Internal Graphics
Use this item to keep IGD (Internal Graphics Device) enabled based on the setup
options. The settings are
Auto
, Disabled, and Enabled.
IGFX Boot Display
Use this item to select which video device will be activated during POST. The
options are
Auto , CRT, DVI-D, and CRT+DVI-D
GTT Size
Use this item to determine the GTT (Graphics Translation Table) size. The op -
tions are 1MB and 2MB .
Aperture Size
Use this item to select the Aperture size. The options are 128MB, 256MB , and
512MB.
DVMT Pre-Allocated
Use this item to select the pre-allocated DVMT (Dynamic Video Memory Tech-
nology) graphics memory size used by the IGD (Internal Graphics Device). The
options are 32M,
64M
, 96M, 128M, 160M, 192M, 224M, 256M, 288M, 320M,
352M, 384M, 416M, 448M, 480M, 512M, and 1024M.
DVMT Total Gfx Mem
Use this item to select the pre-allocated DVMT (Dynamic Video Memory Tech-
nology) graphics memory size used by the IGD (Internal Graphics Device). The
options are 128M, 256M , and MAX.
Gfx Low Power Mode
If set to Enabled, the graphics render clock speed is reduced to save power. The
options are
Enabled and Disabled.