Supero C7B75, User Manual

Page: 32 / 97

2-8
C7B75 User’s Manual
2-3 Installing DDR3 Memory
Note : Check the Supermicro website for recommended memory mod -
ules.
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
DIMM Installation
1. Insert the desired number of DIMMs
into the memory slots, starting with
DIMM1A (Slot A, Channel 1, see the
next page for the location). For best
performance, please use the memory
modules of the same type and speed
in the same bank.
2. Push the release tabs outwards on
both ends of the DIMM slot to unlock
it.
Release Tabs
Notches
3. Align the key of the DIMM mod -
ule with the receptive point on the
memory slot.
Press both notches
straight down into
the memory slot.
4. Align the notches on both ends of
the module against the receptive
points on the ends of the slot.
5. Use two thumbs together to press
the notches on both ends of the
module straight down into the slot
until the module snaps into place.
6. Press the release tabs to the lock
positions to secure the DIMM module
into the slot.
Removing Memory Modules
Reverse the steps above to remove the
DIMM modules from the motherboard.
BIOS
LICENSE
JTPM1
JPW2
JSD1
I-SA
TA4
I-SA
TA5
I-SA
TA2
I-SA
TA3 I-SA
TA1
I-SA
TA0
COM4
COM3
JL1
JBT1
JWOR1
JI2C1
JI2C2
JPW1
LED1
JWOL
JLED1
JA
T1
JPT1
JPME2
JPAC1
SP1
FAN3 FAN2
FAN1
FAN4
JD1
(CPU F
AN)
USB2.0-2/3
LAN
AUDIO FP
DIMM2A
HD AUDIO
USB4/5
USB8/9
USB3.0, 2.0-0/1
DIMM1B
DIMM1A
JF1
ALWAYS POPULATE BLUE SOCKET FIRST
UNB NON-ECC DDR3 DIMM REQUIRED
SLOT4 PCI-E 2.0 X4 (IN X16)
SLOT5 PCI 33MHz SLOT6 PCI-E 2.0 X1 SLOT7 PCI-E 3.0 X16
COM1/2 VGA/DVI
USB10-13
USB3.0-2/3
DIMM2B
C7B75
JPW2