Supero C7B360-CB-M, User Manual

Page: 91 / 116

4-24
Supermicro C7B360-CB-M/MW Motherboard User’s Manual
RAID Mode Selection
This feature is only available when "SATA Mode Selection" is set to Intel
RST With Optane System Acceleration. The options are
iRST Mode or
Alternate.
Aggressive LPM Support
This feature enables the PCH to aggressively enter link power state. The
options are Disabled or
Enabled .
Storage Option ROM/UEFI Driver
This feature controls the execution of UEFI and Legacy Storage OpROM.
The options are Do not launch, UEFI, and
Legacy .
Serial ATA Port 0~5
Hot Plug
This feature designates the port specified for hot plugging. Set this fea -
ture to Enabled for hot-plugging support, which will allow the user to
replace a SATA disk drive without shutting down the system. The options
are
Disabled or Enabled.
Spin Up Device
When this feature is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The settings are
Disabled or Enabled.
SATA Device Type
Use this feature to identify the type of HDD that is connected to the SATA
port. The options are
Hard Disk Drive and Solid State Drive.
PCH-FW Configuration
The following information is displayed:
•
ME Firmware Version
•
ME Firmware Mode
•
ME Firmware SKU