2-12
Supermicro C7B360-CB-M/MW Motherboard User’s Manual
Installing the Motherboard
1.
Install the I/O shield into the back of the chassis.
2.
Locate the mounting holes on the motherboard. (See the previous
page.)
3.
Locate the matching mounting holes on the chassis. Align the
mounting holes on the motherboard against the mounting holes on
the chassis.
4.
Install standoffs in the chassis as needed.
5.
Install the motherboard into the chassis carefully to avoid damaging
other motherboard components.
6.
Using the Phillips screwdriver, insert a Phillips head #6 screw into a
mounting hole on the motherboard and its matching mounting hole
on the chassis.
7.
Repeat Step 6 to insert screws into all mounting holes.
8.
Make sure that the motherboard is securely placed in the chassis.
Note:
Images displayed are for illustration only. Your chassis
or components might look different from those shown in this
manual.
Summary of Contents for C7B360-CB-M
