Supero C7B360-CB-M, User Manual

Page: 87 / 116

4-20
Supermicro C7B360-CB-M/MW Motherboard User’s Manual
PEG Port Configuration
CPU SLOT 7 PCI-E 3.0 X16
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled,
Enabled, and
Auto .
Max Link Speed
Select Auto , Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
VT-d
This feature enables VT-d. The options are Disabled or Enabled .
GNA Device (B0:D8:F0)
This feature enables the SA GNA device. The options are Disabled or
Enabled .
X2APIC Opt Out
This feature enables X2APIC Opt Out. The options are Disabled or
Enabled.
Graphics Configuration
Graphics Turbo IMON Current
Use this feature to set the limit on the current voltage regulator. The
range is 14-31. Default is
31 .
Skip Scanning of External Gfx Card
By default the computer will scan for External Gfx Card on PEG and PCH
PCIE Ports. If this feature is enabled, the system will not scan for a new
card. The options are
Disabled or Enabled.
Primary Display
Use this feature to select the graphics device to be used as the primary
display. Select from IGFX/PEG/PCI or select SG for switchable GFX. The
options are
Auto , IGFX, PEG, PCIE and SG.
Select PCIE Card
Use this feature to select either Elk Creek 4, PEG Eval or Auto to use
on the platform.