Supero C7B360-CB-M, User Manual

Page: 82 / 116

Chapter 4: AMI BIOS
4-15
Boot Feature
Fast Boot
This feature enables the system to boot with a minimal set of required
devices to launch. This has no effect on BBS boot options. The options
are
Disabled or Enabled.
Quiet Boot
Use this feature to select the screen display between the POST messages
and the OEM logo upon bootup. Uncheck the box to display the POST
messages. Check the box to display the OEM logo instead of the normal
POST messages. The default is
Checked .
Bootup Num-Lock
Use this feature to set the Power-on state for the <Numlock> key. The
options are Off or
On .
Wait for "F1" If Error
Use this feature to force the system to wait until the 'F1' key is pressed
if an error occurs. The options are Disabled or
Enabled .
Re-try Boot
If this feature is enabled, the BIOS will automatically reboot the system
from a specified boot device after its initial boot failure. The options are
Disabled , Legacy Boot, and EFI Boot.
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or gen-
erate NMI based on jumper settings when it is expired for more than
5 minutes. The options are
Disabled or Enabled.
AC Loss Policy Depend on
Use this feature to set the power state after a power outage. Select
Stay Off for the system power to remain off after a power loss. Se-
lect Power On for the system power to be turned on after a power
loss. Select Last State to allow the system to resume its last power
state before a power loss. The options are Stay Off, Power On,
and
Last State .