Supero C7B360-CB-M, User Manual

Page: 39 / 116

Chapter 2: Installation
2-13
2-6 M.2 Installation (optional)
Two M.2 (M-key) connectors are supported by the C7B360-CB-M/MW.
One M.2 is only on the C7B360-CB-MW and is used for WiFi+BT. M.2
devices are used for solid state storage and internal expansion. Follow
the steps below in order to install an M.2 device.
1) Locate one of two standoffs.
Remove and set aside screw.
2) Plug M.2 device into M.2 con-
nector and lower the semi-circle
notched end onto standoff.
3) Replace screw and tighten to
secure M.2 device into place. Do
not over-tighten so as to avoid
damaging the M.2 device.