Chapter 3: System Interface
3-3
2
1
NIC2
Indicates network activity on GLAN2 when flashing.
3-4 SAS Drive Carrier LEDs
Each SAS drive carrier has two LEDs:
•
Green:
When illuminated, the green LED on the front of the SAS drive carrier
indicates drive activity. A connection to the backplane enables this LED to blink
on and off when that particular drive is being accessed.
•
Red:
The SES2 compliant backplane activates the red LED to indicate a drive
failure. If one of the SAS drives fail, you should be notified by your system
management software. Please refer to Chapter 6 for instructions on replacing
failed SAS drives.
NIC1
Indicates network activity on GLAN1 when flashing.
HDD
Indicates IDE channel activity. On the 24042G-6RF this light indicates SAS and/or
DVD-ROM drive activity when flashing.
Power
Indicates power is being supplied to the system's power supply units. This LED
should normally be illuminated when the system is operating.
Summary of Contents for A+ SERVER 2042G-6RF
