Supero A+ SERVER 2042G-6RF User Manual Download

Page: 110 / 114

B-2

+ SE

VER 4042G-6RF/TRF User's Manual

9. From the Windows XP/Windows 2003 Setup screen, press the <Enter> key.

The XP/2003 Setup will automatically load all device files and then, continue

the Windows XP/Windows 2003 installation.

10. After the Windows XP/Windows 2003 OS Installation has completed, the

system will automatically reboot.

B-2 Installing Windows to a Non-RAID System

1. Insert Microsoft's Windows OS Setup CD in the CD-ROM drive and the

system will start booting up from the CD.

2. Continue with the installation. The Windows OS Setup screen will display.

3. From the Windows OS Setup screen, press the <Enter> key. The OS Setup

will automatically load all device files and then continue with the Windows

installation.

4. After the installation has completed, the system will automatically reboot.

5. Insert the Supermicro Setup CD that came with your system into the CD-

ROM drive during system boot and the main screen will display.

Summary of Contents for A+ SERVER 2042G-6RF



















































































































Search results

Summary of Contents for A+ SERVER 2042G-6RF

Reviews:

Related manuals for A+ SERVER 2042G-6RF

Brands by name

Popular brands

Supero A+ SERVER 2042G-6RF, User Manual

Search results

Summary of Contents for A+ SERVER 2042G-6RF

Reviews:

Related manuals for A+ SERVER 2042G-6RF

Brands by name

Popular brands