Supero A+ 1012A-MRF, User Manual

Page: 15 / 108

Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your A+ 1012A-MRF up and
running. Following the steps in the order given should enable you to have the
system operational within a minimal amount of time. This quick setup assumes
that your A+1012A-MRF system has come to you with the processor and memory
preinstalled. If your system is not already fully integrated with a motherboard, pro-
cessor, system memory etc., please turn to the chapter or section noted in each
step for details on installing specific components.
2-2 Unpacking the System
You should inspect the box the A+ 1012A-MRF was shipped in and note if it was
damaged in any way. If the server itself shows damage, you should file a damage
claim with the carrier who delivered it.
2-3 Preparing for Setup
Decide on a suitable location for the rack unit that will hold the A+ 1012A-MRF.
It should be situated in a clean, dust-free area that is well ventilated. Avoid areas
where heat, electrical noise and electromagnetic fields are generated. You will also
need it placed near a grounded power outlet. Read the Rack and Server Precau-
tions in the next section.
The A+ Server 1012A-MRF does not ship with a rack rail hardware package as the
system can be rack mounted without the use of rails. An optional rack rail package
is available if you wish to order from Supermicro. Follow the steps in the order
given to complete the installation process in a minimal amount of time. Please read
tis section in its entirety before you begin the installation procedure outlined in the
sections that follow.
Choosing a Setup Location
•
Leave enough clearance in front of the rack to enable you to open the front door
completely (~25 inches) and approximately 30 inches of clearance in the back
of the rack to allow for sufficient airflow and ease in servicing.This product is for