Supero A+ 1012A-MRF, User Manual

Page: 57 / 108

Chapter 5: Advanced Motherboard Setup
5-11
5-8 Connector Definitions
Power Connectors
A 24-pin main power supply connector(JPW1)
and one 8-pin CPU PWR connector (JPW2)
on the motherboard. These power connec-
tors meet the SSI EPS 12V specification.
In addition to the 24-pin ATX power con-
nector, the 12V 8-pin CPU PWR connector
at JPW2 must also be connected to your
power supply. See the table on the right for
pin definitions.
Warning : To prevent damage to the power
supply or motherboard, please use a power
supply that contains a 24-pin and one 8-pin
power connectors. Be sure to connect these
connectors to the 24-pin (JPW1) and the
8-pin (JPW2) power connectors on the
motherboard. Failure in doing so will void the
manufacturer warranty on your power supply
and motherboard.
ATX Power 24-pin Connector
Pin Definitions
Pin# Definition Pin # Definition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
12V 8-pin PWR Connector
Pin Definitions
Pins Definition
1 through 4 Ground
5 through 8 +12V
Required Connection
Reset Connector
The reset connector is located on pins 3 and
4 of JF1 and attaches to the reset switch on
the computer chassis. See the table on the
right for pin definitions.
Reset Button
Pin Definitions
(JF1)
Pin# Definition
3 Reset
4 Ground
Power Button
The Power Button connection is located on
pins 1 and 2 of JF1. Momentarily contacting
both pins will power on/off the system. This
button can also be confi gured to function
as a suspend button (with a setting in the
BIOS - see Chapter 4). To turn off the power
when set to suspend mode, press the button
for at least 4 seconds. Refer to the table on
the right for pin defi nitions.
Power Button
Pin Defi nitions
(JF1)
Pin# Definition
1 PWR
2 Ground