Supero A+ 1012A-MRF, User Manual

Page: 66 / 108

5-20
A+ Server 1012A-MRF User's Manual
BMC Jumper
JPB1 is used to enable or disable the BMC
(Baseboard Management Control) Chip and
the onboard IPMI connection.This jumper is
used together with the IPMI settings in the
BIOS. The default position is on pins 1 and
2 to Enable BMC. See the table on the right
for jumper settings.
BMC Jumper Enable (JPB1)
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (default)
Pins 2-3 Disabled
TPM Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (default)
Pins 2-3 Disabled
TPM Support Enable
JPT1 allows the user to enable TPM (Trusted
Platform Modules) support to enhance data
integrity and system security. See the table
on the right for jumper settings. The default
setting is enabled.
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
LAN LED
(Connection Speed
Indicator)
LED Color Definition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on the
H8SML-7F and H8SML-iF serverboards. The
amber LED on the right indicates activity,
while the green LED on the left indicates
the speed of the connection. See the table
at right for more information.
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color Status Definition
Green:
Solid
Link
(Left)
100 Mb/s
Amber
Blinking
Activity
(Right)
Active